Systemline S6.2

Description

6 audio sources to up to 16 independent zones
This is our flagship home run wiring system product. Each Controller supports 6 inputs which can be switched to ether connect to centralled sources, or a remote audio which can be made it available to all other zones. Two units can be connected to service 16 zones. There is a vast array of control options, including simple hard button keypads, learning keypads and Touch Screen keypads. Wireless control can be from a choice of two machined from solid aluminium IR handsets, a propriatory Wireless Commander which combines touch screen control and hard button control and of course control by iDevices such as iPads and iPhones. 3rd party device control including HDMI matrix switches and lighting control etc is via 6 x RS232 ports.

Features

  • 6 Sources in to 8 zones (expandable to16 zones using two S6.2’s)
  • Each source input is switchable and can be connected either centrally or from a remote location in any zone (via a wired balanced line CAT-5 link)
  • 1 x RS232 interface port to drive 3rd party HDMI
    matrix switcher
  • 6 x RS232 interface ports to interface with SystemNet Partner products
  • Supplied in-the-box with S6.2
  • 8 x Audio interconnect cables
  • 1 x LRN7 Learning handset (inc SystemNet CD)
  • 4 x SL-SE Window Emitters
  • 2 x SL-TE Window Emitters
  • 1 x 5 Amp IEC mains cable
  • 3 x RS232 cables (straight and through)
  • 3 x RS232 cables (null-modem)
  • 1 x RJ45 Patch cable
  • Multi-function in-wall Touch Screen control
  • Multi-function wireless Commander which exactly replicates the GUI of the in-wall touch screen.
  • Multi-function control from iDevices such as iPad’s
  • Simple control from IR handsets or hard button in-wall keypads
  • Home Cinema zone integration
  • Party mode
  • Configuration via Ethernet port
  • S6.2 is supplied with 6 x RS232 serial cables, IR Emitters, Learning remote control and audio cables

Specification

  • Audio Connections: Audio Connections: Direct inputs: Stereo analogue in RCA X 6; Looping source outputs: Stereo 3.5mm jack x 6 (one for each source); Local inputs: RJ45 from Cat5 cables x 8 (one from each zone) 
  • Pre-outs: Stereo analogue out RCA x 8 (one for each zone)
  • Direct source: Frequency response: 20Hz – 20kHz +/- 0.1dB; THD + N: <0.03% @ 1kHz 0dB; S/N ratio > 95dB
  • Control inputs: Keypads: KPM7, LKPM7 on RJ45 x 8 (one from each zone), monochrome and colour touch screens
  • Ethernet: RJ45 10/100 Mb/s standard Ethernet link
  • Link: RJ45 to synchronise two S6.2 units (When using Wireless Touch Screens)
  • Video matrix switch: 9 way D-type RS232 control for supported video matrix switches
  • IR emitter output: 3.5mm jack x 6 (one per source),
    3.5mm jack x 2 for global
  • S232 I/O ports: 9 way D-types x 6 
  • RS232 Control: 9 way D-type for external 3rd party control of each audio zone (does not pass through RS232 from I/O ports)
  • Front panel display: LEDs showing status of each zone, LEDs showing signal activity of audio matrix and zone preamp, LEDs showing signal activity of touch screens and RS232 control
  • Power supply: 120-240V 47/63Hz selectable via rear
    panel switch
  • Power consumption: 150W Max.
  • Dimensions WxHxD: 438 x 140 x 342mm (17.25 x 5.5 x 13.5”)
  • Weight: 11.0kg (24.2lbs)